Skip to content

Optimization of workings maintenance parameters taking into account the prediction of the stability index

UDC: 622.261.5:622.268.6
DOI: 10.24412/2519-2418-2026-947-48-59
EDN: COUXVO
Received: 18.02.2026
Published: 05.03.2026

Original language: ru

Full text of the article | JATS XML

Dolzhikov Petr Nikolaevich, Doctor of Technical Sciences, Professor, Antratsyt Institute of Geosystems and Technologies (branch) of V. Dahl Luhansk State University, Professor of the Department of Construction and Geocontrol, email: dolpn@yandex.ru
Paleichuk Nikolay Nikolaevich, Candidate of Technical Sciences, Lugansk State University named after Vladimir Dahl, docent of the department of construction and geocontrol, email: paleynik@gmail.com
Sharko Andrey Aleksandrovich, Lugansk State University named after Vladimir Dahl, Senior Lecturer of the Department of Construc tion and Geocontrol, email: wagerlex@yandex.ru

Abstract
The article considers the issue of maintaining preparatory mine workings throughout their service life. Based on the analysis of the actual condition of the mine workings in the Bokovo-Khrustalsky and Dolzhano-Rovenetsky geological and industrial regions, it has been established that the use of standard parameters in design does not ensure the required long-term stability of the mine workings. The paper proposes a method for optimizing the parameters of mine workings and the density of frame-arch supports, taking into account the prediction of the stability indicator. The study substantiates the need for a rational, technical, and economic approach to selecting the parameters for maintaining mine workings, which allows for ensuring their stability at minimal total costs.

Keywords: mine, stability forecasting, frame-arch support, costs of maintenance and repair

REFERENCES
  1. Шашенко, А. Н. Некоторые задачи статистической геомеханики [Текст] / А. Н. Шашенко, С. Б. Тулуб, Е. А. Сдвижкова. – Днепропетровск: НГУ, 2003. – 465 с.
  2. Должиков, П. Н. Устойчивость выработок в интенсивно трещиноватых породах глубоких шахт [Текст] / П. Н. Должиков, А. Э. Кипко, Н. Н. Палейчук. – Донецк: Світ книги, 2012. – 220 с.
  3. Палейчук, Н. Н. О степени влияния геологических факторов на устойчивость выработок антрацитовых шахт [Текст] / Н. Н. Палейчук, Е. В. Князькова, О. А. Рыжикова // Актуальные проблемы современной науки: взгляд молодых ученых: сб. тез. докл. науч.-практ. конф. / под общ. ред. С. В. Куберского. – Алчевск: ДонГТУ, 2019. – С. 24-26.
  4. Шашенко, А. Н. Механика горных пород [Текст] / А. Н. Шашенко, В. П. Пустовойтенко. – К.: Новий друк, 2003. – 399 с.
  5. Скобенко, А. В. Обоснование параметров рамной крепи капитальных и подготовительных выработок угольных шахт на основе вероятностно-статистических моделей: автореф. дис. канд. техн. наук: 05.15.04 / А. В. Скобенко; НГУ. – Днепропетровск, 2001. – 16 с.
  6. Палейчук, Н. Н. Основы горно-строительного производства: учеб. Пособие [Текст] / Н. Н. Палейчук, А. А. Шарко, А. Ю. Лазебник. – Луганск: Изд-во ЛНУ им. В. Даля, 2021. – 250 с.
  7. Раевский, Д. И. Геомеханическое обоснование устойчивости подготовительных горных выработок в слоистых массивах при пологом залегании угольных пластов: автореф. дис. канд. техн. наук: 25.00.20 / Д. И. Раевский; СГТУ. – СПб., 2005. – 16 с.
  8. Роенко, А. Н. Обоснование параметров способа поддержания подготовительных выработок вне зоны влияния очистных работ [Текст] / А. Н. Роенко, Р. Н. Терещук, А. В. Наумович // Науковий вiсник НГУ. – 2010. – № 3. – С. 6–8.
  9. Должиков, П. Н. Устойчивость горизонтальных выработок глубоких шахт в обводненных породах [Текст] / П. Н. Должиков, А. Э. Кипко, Ю. И. Кобзарь, Ю. П. Должиков. – Донецк: Норд-Пресс, 2010. – 191 с.
Мы используем файлы cookie и рекомендательные технологии. Пользуясь сайтом, вы соглашаетесь с Политикой обработки персональных данных.
Принять
Политика конфиденциальности